Product Description

Products Description
Car fitment:

• AUDI
  • A8 (4E2, 4E8)  [2002-2571]
  • A6 2005-2009
  • A6 Quattro 2005-2009
  • A8 Quattro 2005-2009
  • S6 2007-2008
  • S8 2007-2009
• AUDI (FAW)
  • A6L Saloon (4F2, C6)  [2005-2012]
• VOLKSWAGEN
  • Phaeton 2004-2006

Specification: Front Axle
Rear Axle
Hub Pilot Diameter: 3.6 In.
Hub Bolt Circle Diameter: 4.5 In.
Bolt Quantity: N/A
Bolt Hole qty: 4
ABS Sensor: No
Number of Splines: N/A

Wheel Hub Bearing

A hub bearing, also known as a wheel hub bearing, enables the wheels and attached components to rotate smoothlyand keeps the wheel attached to the car. The bearings are mounted on a wheel hub, which is located between the brake drums and the axle. 
Wheel bearings wear out over time due to age and contamination. As they wear out, excess play also develops in the bearing. The main signs of a damaged wheel hub bearing are abnormal noises and loose steering.
Our hub bearing assemblies are made from high quality materials for durability, reliability, and high performance. 
A high quality seal design offers premium protection from contamination and ensures a clean, long lasting hub bearing.
Our hub bearings are precision-machined and pre-coated with an anti-corrosion lubricant for enhanced protection and performance. They are manufactured to meet or exceed expectations for performance and fit.
In addition, they are designed for quick and easy installation. Please note: Hub Bearings should always be replaced in pairs (front or rear). 
In addition, hub bearings must be torqued to vehicle specifications to prevent failure.

Solver problem:

• Frequently unberable
• Car Jitter
• Power reduction
• Car noise

Features:

• Good Ball: Precision and dimensions are more stable.

• Good grease: allow the bearing to roll smoother.

• Durable quality: excellent metal material, wear-resistant and durable.

  All products are all factory full inspection , like ABS detection,noise detection, cleareance detection for completed product, vibration detection, Angular clearance detection, Waterproof and dustproof detection and so on, making products more durable,more safe and life longer.

• Reduce abnormal noise,Stable driving
• High security
• Longer service life and lower maintenance cost.
• In-situ installation: Original specification,installation in 1 step. With accurately locate mounting holes.

 

 

Why choose us to be your cooperated supplier from China?
1. A wide range of Wheel Hub Bearingfor options.
2. Quality assurance: Advanced equipment, 100% finished product check, all of the products are inpsected carefully by QC before delivery. Product is Safe, Fixed,Stable,Durable.
3. Fast delivery, Prompt response,Professional staffs.
4. The customized components also can be manufactured
5. Neutral packing, export standard carton, or as your requirement.
6. Competive price: Order a HQ container, price will be more favorable.

Related Products
1. A wide range of Radiator Cooling Fan and other parts for options.
2. Quality assurance: Advanced equipment, 100% finished product check, all of the products are inpsected carefully by QC before delivery. Product is Safe, Fixed,Stable,Durable.
3. Fast delivery, Prompt response,Professional staffs.
4. The customized components also can be manufactured
5. Neutral packing, export standard carton, or as your requirement.
6. Competive price: Order a HQ container, price will be more favorable.

VW, AUDI, BENZ, BMW, PORSHCHE, LAND ROVER,Toyota, Nissan, Mitsubishi, Honda, Mazda , Hyundai Fordetc.
1. Clutch system
2. Cooling system
3. Electrical system
4. Transmission system
5. Steering system
6. Drive system
7. Suspension system
8.Braking syste

Company Introduction

FAQ
1. Is the product fit to your car model?
Please check if the parts are suitable for your model before purchase.
Or please tell us your Car Model and OE Number, and tell us the product name.

2. What you can supply to me?
We could supply all kinds of auto spare parts and accessories. Besides ,we provide OEM service, shipping service and QC service as well to make sure you get ONE-STOP purchase process from us.

3. Can you customize the products as per our request?
Yes, we do OEM and ODM. We could make the product suggestion based on your idea and budget.

4. How to get a sample from you?
All samples will be free if unit cost under 20USD,but the freight should be on your side. If you have express account like DHL,UPS etc we will send you directly, if you don’t have you can send express cost to our paypal account, any sample cost could be returned when you make order.

5. What’s your payment term?
We usually doing 30% deposit and 70% balance against copy of B/L by T/T, We also accept L/C ,D/P if total amount over $30000.

Welcome to your inqury now and built a long cooperatitive relationship with our professional service.

Windy Zhang

How to Calculate the Diameter of a Worm Gear

In this article, we will discuss the characteristics of the Duplex, Single-throated, and Undercut worm gears and the analysis of worm shaft deflection. Besides that, we will explore how the diameter of a worm gear is calculated. If you have any doubt about the function of a worm gear, you can refer to the table below. Also, keep in mind that a worm gear has several important parameters which determine its working.

Duplex worm gear

A duplex worm gear set is distinguished by its ability to maintain precise angles and high gear ratios. The backlash of the gearing can be readjusted several times. The axial position of the worm shaft can be determined by adjusting screws on the housing cover. This feature allows for low backlash engagement of the worm tooth pitch with the worm gear. This feature is especially beneficial when backlash is a critical factor when selecting gears.
The standard worm gear shaft requires less lubrication than its dual counterpart. Worm gears are difficult to lubricate because they are sliding rather than rotating. They also have fewer moving parts and fewer points of failure. The disadvantage of a worm gear is that you cannot reverse the direction of power due to friction between the worm and the wheel. Because of this, they are best used in machines that operate at low speeds.
Worm wheels have teeth that form a helix. This helix produces axial thrust forces, depending on the hand of the helix and the direction of rotation. To handle these forces, the worms should be mounted securely using dowel pins, step shafts, and dowel pins. To prevent the worm from shifting, the worm wheel axis must be aligned with the center of the worm wheel’s face width.
The backlash of the CZPT duplex worm gear is adjustable. By shifting the worm axially, the section of the worm with the desired tooth thickness is in contact with the wheel. As a result, the backlash is adjustable. Worm gears are an excellent choice for rotary tables, high-precision reversing applications, and ultra-low-backlash gearboxes. Axial shift backlash is a major advantage of duplex worm gears, and this feature translates into a simple and fast assembly process.
When choosing a gear set, the size and lubrication process will be crucial. If you’re not careful, you might end up with a damaged gear or 1 with improper backlash. Luckily, there are some simple ways to maintain the proper tooth contact and backlash of your worm gears, ensuring long-term reliability and performance. As with any gear set, proper lubrication will ensure your worm gears last for years to come.

Single-throated worm gear

Worm gears mesh by sliding and rolling motions, but sliding contact dominates at high reduction ratios. Worm gears’ efficiency is limited by the friction and heat generated during sliding, so lubrication is necessary to maintain optimal efficiency. The worm and gear are usually made of dissimilar metals, such as phosphor-bronze or hardened steel. MC nylon, a synthetic engineering plastic, is often used for the shaft.
Worm gears are highly efficient in transmission of power and are adaptable to various types of machinery and devices. Their low output speed and high torque make them a popular choice for power transmission. A single-throated worm gear is easy to assemble and lock. A double-throated worm gear requires 2 shafts, 1 for each worm gear. Both styles are efficient in high-torque applications.
Worm gears are widely used in power transmission applications because of their low speed and compact design. A numerical model was developed to calculate the quasi-static load sharing between gears and mating surfaces. The influence coefficient method allows fast computing of the deformation of the gear surface and local contact of the mating surfaces. The resultant analysis shows that a single-throated worm gear can reduce the amount of energy required to drive an electric motor.
In addition to the wear caused by friction, a worm wheel can experience additional wear. Because the worm wheel is softer than the worm, most of the wear occurs on the wheel. In fact, the number of teeth on a worm wheel should not match its thread count. A single-throated worm gear shaft can increase the efficiency of a machine by as much as 35%. In addition, it can lower the cost of running.
A worm gear is used when the diametrical pitch of the worm wheel and worm gear are the same. If the diametrical pitch of both gears is the same, the 2 worms will mesh properly. In addition, the worm wheel and worm will be attached to each other with a set screw. This screw is inserted into the hub and then secured with a locknut.

Undercut worm gear

Undercut worm gears have a cylindrical shaft, and their teeth are shaped in an evolution-like pattern. Worms are made of a hardened cemented metal, 16MnCr5. The number of gear teeth is determined by the pressure angle at the zero gearing correction. The teeth are convex in normal and centre-line sections. The diameter of the worm is determined by the worm’s tangential profile, d1. Undercut worm gears are used when the number of teeth in the cylinder is large, and when the shaft is rigid enough to resist excessive load.
The center-line distance of the worm gears is the distance from the worm centre to the outer diameter. This distance affects the worm’s deflection and its safety. Enter a specific value for the bearing distance. Then, the software proposes a range of suitable solutions based on the number of teeth and the module. The table of solutions contains various options, and the selected variant is transferred to the main calculation.
A pressure-angle-angle-compensated worm can be manufactured using single-pointed lathe tools or end mills. The worm’s diameter and depth are influenced by the cutter used. In addition, the diameter of the grinding wheel determines the profile of the worm. If the worm is cut too deep, it will result in undercutting. Despite the undercutting risk, the design of worm gearing is flexible and allows considerable freedom.
The reduction ratio of a worm gear is massive. With only a little effort, the worm gear can significantly reduce speed and torque. In contrast, conventional gear sets need to make multiple reductions to get the same reduction level. Worm gears also have several disadvantages. Worm gears can’t reverse the direction of power because the friction between the worm and the wheel makes this impossible. The worm gear can’t reverse the direction of power, but the worm moves from 1 direction to another.
The process of undercutting is closely related to the profile of the worm. The worm’s profile will vary depending on the worm diameter, lead angle, and grinding wheel diameter. The worm’s profile will change if the generating process has removed material from the tooth base. A small undercut reduces tooth strength and reduces contact. For smaller gears, a minimum of 14-1/2degPA gears should be used.

Analysis of worm shaft deflection

To analyze the worm shaft deflection, we first derived its maximum deflection value. The deflection is calculated using the Euler-Bernoulli method and Timoshenko shear deformation. Then, we calculated the moment of inertia and the area of the transverse section using CAD software. In our analysis, we used the results of the test to compare the resulting parameters with the theoretical ones.
We can use the resulting centre-line distance and worm gear tooth profiles to calculate the required worm deflection. Using these values, we can use the worm gear deflection analysis to ensure the correct bearing size and worm gear teeth. Once we have these values, we can transfer them to the main calculation. Then, we can calculate the worm deflection and its safety. Then, we enter the values into the appropriate tables, and the resulting solutions are automatically transferred into the main calculation. However, we have to keep in mind that the deflection value will not be considered safe if it is larger than the worm gear’s outer diameter.
We use a four-stage process for investigating worm shaft deflection. We first apply the finite element method to compute the deflection and compare the simulation results with the experimentally tested worm shafts. Finally, we perform parameter studies with 15 worm gear toothings without considering the shaft geometry. This step is the first of 4 stages of the investigation. Once we have calculated the deflection, we can use the simulation results to determine the parameters needed to optimize the design.
Using a calculation system to calculate worm shaft deflection, we can determine the efficiency of worm gears. There are several parameters to optimize gearing efficiency, including material and geometry, and lubricant. In addition, we can reduce the bearing losses, which are caused by bearing failures. We can also identify the supporting method for the worm shafts in the options menu. The theoretical section provides further information.